BusRun Bridges
Bridges are portable, plug-in, cross-pieces for use between permanent BusRun lengths.

BusRun PowerTaps
Field-attached to approved lighting fixture, for power only (support by other device). Fitting at one end of woven stainless steel-enclosed cable, leads at opposite end.

BusRun Plug-Ins
PowerDown Boxes are available with up to 30 amp breakers, supplied with knockouts, or up to 20 amp fuses, supplied with 3-prong, twist-lock receptacle or knockouts.

BusRun Feeds
An illustrated guide to feeds available for surface mounted, hanging and recessed BusRun configurations. Click on the BusRun Feed Guide link at right.

BusRun Signhanger
Can be plugged into BusRun lengths, Struts, Bridges or BusPoints to support up to 40-pound static, vertical load.

BusRun Current Limiter
Litelab Busway can be provided with an integral current limiter built into the power feed to aid in meeting the various energy code restrictions. Available circuit breaker values are as shown on the download drawing at right.

Low Voltage Power Supplies
Using 1/3 the number of transformers and feeds, low-voltage BusRun busway enables the designer to specify low-profile fixtures with remote transformers, for a practical solution with significant savings. General Purpose lighting transformers do not operate Low Voltage Lighting at optimum light output levels. Low Voltage Power Supply Centers (PSC) are the first transformer systems specifically designed for today's low voltage lighting and its unique installation requirements. The heart of the PSC system is a Toroidal Multi-Volt Transformer — known for its small size, superior voltage regulation, quiet operation, high efficiency, cool operating temperature and its ability to take the stress of dimming.